Archive for the ‘Graffiti Removal’ Category

Soda Blasting

Friday, October 9th, 2009

Sodablasting is a process where sodium bicarbonate is applied against a surface using compressed air.

Sodablasting is a non-destructive method for many applications in cleaning, paint stripping, automotive restoration, industrial equipment maintenance, rust removal, graffiti removal, masonry cleaning and restoration, boat hull cleaning, food processing facilities and equipment.

Demon offer a complete package for those looking to offer Soda Blasting as part of their business. Visit us at our HQ and we will demonstrate how the products work, once you are up and running we offer ongoing technical support and are stockists of Armex soda blasting media.

Videos and further information can be viewed at:
http://www.demon-pressure-washers.co.uk/acatalog/Soda_Blasting.html 

For more information give us a call on 01752 690690.

Tags: , , , , , ,
Posted in Graffiti Removal, Soda Blasting | No Comments »

DemoClean Graffiti Remover Gel

Friday, August 21st, 2009

DemoClean Graffiti Remover Gel is an effective graffiti removing gel which is not classified hazardous under CHIP regulations.

Graffiti Remover Gel will remove aerosol paint, felt tip marker and a variety of paint and ink.

Graffiti Remover Gel is effective on most types of surface including brick and masonry etc. Always check a small area for compatibility.

Benefits:

  • Non Hazardous under CHIP regulations
  • Low odour for operator comfort and safety
  • Low rate of evaporation leading to low product loss
  • Non chlorinated giving a safe, environmentally responsible product
  • High flash point for safety
  • Easy to use gel leading to minimal run off and waste
  • Excellent rinsability with water

 Application:

Graffiti remover Gel is designed to be used undiluted.

Smooth Surfaces

Apply the gel over the graffiti. Allow it to dwell for 5-25 minutes then agitate the surface with a brush or clean dry cloth. Wipe off the gel with a clean, dry cloth, turning the cloth frequently to ensure the graffiti is not returned to the surface.

Wipe off any residue with a clean damp cloth, and then rinse the surface. For best results, rinse with a mild alkaline cleaner.

Masonry/Brick:

Apply the gel over the graffiti using a brush or roller and allow to dwell for up to 60 minutes. Remove by using either a Demon Hot or Cold water Pressure Washer. Using Armex soluble blast media through the ‘EMIS’ system will dramatically improve results on stubborn areas and increase efficiency.

Posted in Graffiti Removal | No Comments »