For more information about all our products and services click here
|
Apply the Gel with a brush or a roller and give it time to work |
|
Blast the graffiti using the Emis® (Environmental Media Injection System) using Armex® Flow Formula XL |
|
The finished result |
|
| At Demon we have devised a simple and cost effective graffiti removal system. Simply put the graffiti is pre-treated with our own formula Democlean Graffiti product by brush or roller then pressure washed after 5 to 30 minutes. If the graffiti is stubborn we recommend using the EMIS® system with water soluable Armex® sodium bicarbonate which acts with a gentle scrubbing action with the gel to agitate the surface aiding full removal. This system will work with any pressure washer in our range which gives 2900psi and 15 litres per minute. We can supply a complete system with either hot water or cold. For sensitive surfaces we have a Polycarbonate Safe Gel which will not damage plastic surfaces. This is applied by brush or a cloth and can be wiped away with a damp clean cloth or pressure washed. |
|
A very colourful tag with aerosol paints (the empty cans were on the floor) and line marking yellow paint - almost a shame to remove it but off it comes |
|
Apply the Gel with a brush or a roller and give it time to work |
|
This graffiti was removed by allowing a contact time of 30 minutes and removed just with the turbo lance attachment with hot water |
For more information about all our products and services click here